hydgooho 16 Inch Leaf Bowl Trimmer，Hydroponic Twisted Spin Cut for Herb Bud and Flower,with Stainless Steel Hand Crank
Huge Savings Item! Free Shipping Included! Save 15% on the hydgooho 16 Inch Leaf Bowl Trimmer，Hydroponic Twisted Spin Cut for Herb Bud and Flower,with Stainless Steel Hand Crank by hydgooho at Gerson Mauri. MPN: 4336555016. Hurry! Limited time offer. Offer valid only while supplies last. HOW TO USE: 1.Place the untrimmed on the grill.Place the untrimmed plants on top of the grill.The plants should be many to make sure the grill
HOW TO USE:
1.Place the untrimmed on the grill.
Place the untrimmed plants on top of the grill.The plants should be many to make sure the grill surface is covered(approximately 40 dry grams).
2.Place the top and install the handle.
Place the top and install the handle on the top of the trimmer's base.The inside of the top contains the high-density rubber tongues that are used to push the plant leaves into the blade grill.The cutting blades or wires are located below the grill.
3.Tum the handle cloclwise about 15-30 rounds.
Using the handle,make 15-30 complete turns.While spinning the handle,the inside rubber twist tongues multiplies the rate of the spinning plants and blades by over 30 times.
A combination of the rubber tongues presses and rolls the plants into the spinning blades can improve the cutting efficiency.Only 30 seconds can vield one hour's work.
4.Remove the top and collect the plants.
Open the top and the trimmed plants and their fragmental bud/leaves can be found individually on the middle grill and in the trimmer basin.
Depending on the type of platns,the trimming can be used for the preparation of plants's essential oils.
5.Repeat the process for more harvest.
If you think the leave pieces are not small enough,keep repeating the above process as many times as you want,or until you have completed your harvest.When finished,easy clean every part of the trimmer and store it.
MATERIAL:clear plastic and stainless steel
Never place your figers,gloves or any other body part in contact with the grill or the blade.
Do ont use scissors,knives or any instrument above the grill.
Bowl trimmer does not accept any responsibility for damages caused to or
by the trimmers resulting from an inadequate use or assembly.
Please use the trimmers in accordance with existing laws and regulations.
Features & Highlights
- ※Hydroponic Cut for bud and flower:This trimmer will cut twigs and remove leaves from a multitude of different plants for projects like making essential oils, aromatherapy products, and potpourris.
- ※Efficient Work:The bowl trimmer will take an hour of hand trimming and reduce it to 30 seconds; It will save you time and from the frustration caused by hand trimming
- ※Easy to Use- Our bud trimmer is easy to use; Just place what you want to trim onto the grill, put the lid on, and turn the handle 15 to 30 times
- ※Sharp Blade: The sharp blade allows for clean cuts without damaging the plant
- ※Harness the power of 30 scissors in 1 Unit
|Package Weight:||12 pounds|
|Package Size:||16.5 x 10.5 x 10.5 inches|
Have questions about this item, or would like to inquire about a custom or bulk order?
If you have any questions about this product by hydgooho, contact us by completing and submitting the form below. If you are looking for a specif part number, please include it with your message.
Related Best Sellers
The Zip Trim Cordless Weed Trimmer is great for anyone who works in the garden everyday. All the RPM power of a traditional trimmer in the palm of your hand. You can use any standard size zip ties, or cut them down for more precision work. Lightweigh...
By Weed Eater
mpn: T100i, ean: 0024761026574,
The all new Weed Eater T100i string trimmer is compact, super lightweight, easy to start, and easy to use, with simple, intuitive controls. With a 12" cutting path, and single-line trimmer head that automatically feeds cutting line when needed, trimm...
Fits the following models: HUSQVARNA: 122L, 123L, 123LD, All 225 Series, 227LD, all 232 Series, 235R, 322L, 322R, 324LX, 324RX 323R, 325LX, 325L, 325R, 325RJX, 325RX, 326L, 326LDX, 326LX, 326RJX, 326RX, 323L, 323R, 335LS REDMAX: BC200, BC250, BC2000D...
mpn: 007190090600139, ean: 0714394867469,
Genuine Original Equipment Manufacturer (OEM) parts! 007190090600139 For Black & Decker.This part is compatible with models including; LST420 TYPE 1,LST400 TYPE 1. Genuine Original Equipment Manufacturer (OEM) part. Compatible Brands: Black & Decker....
Genuine Original Equipment Manufacturer (OEM) parts! This drive shaft housing (part number 503888801) is for line trimmers. Drive shaft housing 503888801 houses and protects the drive shaft. Wear work gloves to protect your hands when installing this...
Genuine Original Equipment Manufacturer (OEM) parts! The drive shaft assembly (part number 575261201) is for line trimmers. Drive shaft assembly 575261201 rotates the cutting head on the line trimmer. The assembly may include multiple parts; refer to...
mpn: CMESTA900, ean: 0885911550178,
Electric powered string trimmer 13 in.Electric-powered 13-inch string trimmer. Single-line with auto-feed feature. Runs on .065-Inch diameter line. Twist & edge capability feature. ...
Genuine Original Equipment Manufacturer (OEM) parts! Husqvarna 545081869 Line Trimmer Switch Kit For Weed Eater, Poulan, & Craftsman.This part is compatible with models including; FL26C,FX26SC,P3500 TYPE 2,P3500 TYPE 1,FL26C TYPE 1,P1500,XT700 TYPE 1...
By Homelite Inc
Genuine Original Equipment Manufacturer (OEM) parts! This manufacturer-approved fuel tank assembly (part number 3075702) is for line trimmers. Fuel tank assembly 3075702 holds fuel. The assembly may include multiple parts; refer to your parts diagram...